Alfatron 30X-SDI

Category:

Description

Alfatron 30X-SDI

The ALF-30X-SDI is an HD PTZ 1080p equipped camera with a 30x Zoom Lens. This PTZ camera is suitable for medium to large-sized meeting rooms, boardrooms, conference venues, and houses of worship. Alfatron ALF-30X-SDI is compatible with video meeting software, such as Teams and Zoom. The Full HD 1080P camera is equipped for a high-quality video stream and high definition real-time synchronization.

Product Features

  • 1080P video with a Frame rate up to 60fps
  • 30x Zoom Lens which gives you a clear and a fluent image
  • Leading Auto Focus Technology
  • Low Noise and High SNR
  • Quiet PTZ
  • 255 Presets
  • Multiple Network Protocol – Supports IP VISCA, ONVIF, RTSP & RTMP
  • Control Protocols – VISCA IP, ONVIF, PELCO-D, PELCO-C and VISCA standard protocols
  • Field of view 2.34°(Tele) – 65.1°(Wide)
  • HDMI, SDI, LAN, RS-232, audio input and is supplied with an IR remote control
  • PC control using Sony Visca or Pelco-D/P commands
  • 12V DC or POE Powered
  • Ships with either a Ceiling or Wall mount bracket

 

OBS SOFTWARE COMPATIBLE

7 YEAR WARRANTY

DEFAULT IP address:192.168.5.163

Specifications

Model  30X        
Camera Parameter
Sensor 1/2.8 inch high quality HD CMOS sensor
Effective Pixels 16: 9,  2.07 megapixel
Video Format HDMI/SDI video format

1080P60/50/30/25/59.94/29.97;1080I60/50/59.94;720P60/50/30/25/59.94/29.97       

Optical Zoom 30X

f=4.3~129mm

View Angle 2.34°(tele)–65.1°(wide)
AV F1.6 ~ F4.7
Digital Zoom 10X
Minimum Illumination 0.5Lux (F1.8, AGC ON)
DNR 2D & 3D DNR
White Balance Auto / Manual/ One Push/ 3000K/ 4000K/5000K/6500K
Focus Auto/Manual
Aperture Auto/Manual
Electronic Shutter Auto/Manual
BLC ON/OFF
WDR OFF/ Dynamic level adjustment
Video adjustment Brightness, Color, Saturation, Contrast, Sharpness, B/W mode, Gamma curve
SNR >55dB

 

Input/Output Interface
Video Interfaces HDMI, 3G-SDI, LAN, Audio-in
Image code stream Double streams outputs simultaneously
Video Compression format H.264, H.265
Control Signal Interface  RS-232 Ring through RS232 output, RS-485
Control Protocol VISCA/Pelco-D/Pelco-P; Baud Rate: 115200/9600/4800/2400bps
Audio input Interface Double track 3.5mm linear input;
Audio Compression Format AAC/MP3/PMC Audio compression
HD IP Interface 100M IP port (100BASE-TX); support IP Visca control protocol
Network Protocol RTSP/ RTMP, ONVIF
Power Interface HEC3800 outlet (DC12V) / POE

 

PTZ Parameter
Pan Rotation ±170°
Tilt Rotation -30°~+90°
Pan Control Speed 0.1 -180°/sec
Tilt Control Speed 0.1-80°/sec
Preset Speed Pan: 60°/sec, Tilt: 30°/sec
Preset Number 255 presets (10 presets by remote controller)
Other Parameter
Supply Adapter AC110V-AC220V to DC12V/2A
Input Voltage DC12V±10%
Input Current 1A(Max)
Consumption 12W (Max)
Store Temperature -10℃ to +60℃
Store Humidity 20% – 95%
Working Temperature -10℃ to +50℃
Working Humidity 20%–80%
Dimension 150mmX150mmX167.5mm
Weight 1.4KG
Working Environment Indoor
Remote Operation (IP) Remote Upgrade, Reboot and Reset
Accessory Power Supply, RS232 Control Cable, Remoter, Manual, Warranty card
Optional Accessory Ceiling or Wall mount Bracket

 

Resources

User Manual

Streaming setup Guide

Wall or Ceiling Mount Bracket

Wall Mount Bracket

 

Ceiling Mount Bracket

FAQ's

1. Q – How is the camera powered ?
    A – With a 12V power supply or via POE.

2. Q – What is the resolution of the camera ?
    A – The camera supports 1080@60fps

3. Q – Can the camera be mounted to the ceiling  ?
    A – Yes, a Alfatron ceiling mount is available

4. Q – What is the zoom range ?
    A – 30x Optical Zoom

5. Q – What is the field of view ?
    A – 2.34° (Tele) ~ 65.1° (Wide)

Firmware Download

Firmware Download here

Both the ARM and Firmware files needs to be uploaded.

Network Upgrade Instructions for Firmware

1. Connect the camera to the computer on the same LAN; open your browser and input the default
IP address:192.168.5.163, The user name: admin and password: admin.

2. Click “configuration” after you have logged in.

3. Click system configuration, then version update, then browse the updated file, and then click to update. After update has been completed, the camera will restart automatically.

4. After the camera has restarted, log in and check whether it has upgraded to the new version.

Network Upgrade Instructions for ARM / HTML File

1. Connect the camera to the computer on the same LAN; open your browser and input the default
IP address:192.168.5.163, The user name: admin and password: admin.

2. Click “configuration” after you have logged in.

3. Click system configuration, then version update, then browse the updated file, and then click to update. After update has been completed, the camera will restart automatically.

4. After the camera has restarted, log in and check whether it has upgraded to the new version.